<?xml version="1.0" encoding="ISO-8859-1"?>
<metadatalist>
	<metadata ReferenceType="Thesis">
		<site>mtc-m21c.sid.inpe.br 806</site>
		<holdercode>{isadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S}</holdercode>
		<identifier>8JMKD3MGP3W34R/44RGBRP</identifier>
		<repository>sid.inpe.br/mtc-m21c/2021/06.09.23.05</repository>
		<lastupdate>2021:09.17.20.25.04 urlib.net/www/2017/11.22.19.04 simone</lastupdate>
		<metadatarepository>sid.inpe.br/mtc-m21c/2021/06.09.23.05.37</metadatarepository>
		<metadatalastupdate>2022:04.03.23.15.45 sid.inpe.br/bibdigital@80/2006/04.07.15.50 administrator</metadatalastupdate>
		<secondarykey>INPE- 18467-TDI/3115</secondarykey>
		<citationkey>Barbosa:2021:PrPrTé</citationkey>
		<title>Prospecção e proposta de técnicas para a conformação de elementos sensores cerâmicos capacitivos utilizando métodos convencionais e manufatura aditiva</title>
		<alternatetitle>Prospection and proposal of techniques for conforming capacitive ceramic sensor elements using conventional methods and additive manufacturing</alternatetitle>
		<course>CMS-ETES-DIPGR-INPE-MCTI-GOV-BR</course>
		<year>2021</year>
		<date>2021-05-31</date>
		<thesistype>Dissertação (Mestrado em Ciência e Tecnologia de Materiais e Sensores)</thesistype>
		<secondarytype>TDI</secondarytype>
		<numberofpages>101</numberofpages>
		<numberoffiles>1</numberoffiles>
		<size>2862 KiB</size>
		<author>Barbosa, Anderson Luis,</author>
		<committee>Nono, Maria do Carmo de Andrade (presidente/orientadora),</committee>
		<committee>Machado, João Paulo Barros,</committee>
		<committee>Melo, Francisco Cristóvão Lourenço de,</committee>
		<committee>Inácio, Miguel Adriano,</committee>
		<e-mailaddress>anderson.barbosa@inpe.br</e-mailaddress>
		<university>Instituto Nacional de Pesquisas Espaciais (INPE)</university>
		<city>São José dos Campos</city>
		<transferableflag>1</transferableflag>
		<keywords>sensores cerâmicos de umidade, filmes de cerâmica porosa, manufatura aditiva, ProKnow-C, VOSviewer, ceramic humidity sensors, porous ceramics films, additive manufacturing.</keywords>
		<abstract>Este trabalho tem como objetivo propor técnicas para a conformação de elementos sensores cerâmicos capacitivos através da revisão sistemática e análise bibliométrica da literatura. Sensores de umidade são de grande importância para diversas aplicações, em especial para a aplicação em monitoramento ambiental. O elemento sensor deve ser confiável, possuir resistências mecânica e química e ser replicável para ser utilizado com segurança em ambientes hostis e com dificuldade de acesso para manutenção. A pesquisa e o desenvolvimento de sensores capacitivos de cerâmica porosa no INPE têm como principal objetivo o monitoramento da umidade relativa do ar e de solos instalados nas Plataformas de Coleta de Dados (PCDs) do INPE. Pretende-se também utilizá-los na agropecuária e monitoramento de deslizamento de encostas. Os elementos sensores na forma monolítica (pastilhas cilíndricas) estão desenvolvidos e se encontra na fase de confecção do sistema sensor (com a parte eletrônica inclusa). Os elementos sensores do tipo filme, que permite a miniaturização do sistema, está em fase de pesquisa. Assim, os métodos de fabricação desses elementos sensores são de grande importância para se atingir os requisitos elicitados. Neste trabalho, foi realizado uma revisão sistemática utilizando a ferramenta ProKnow-C para a identificação dos principais métodos para a fabricação de componentes de um elemento sensor cerâmico capacitivo na forma de filme poroso, assim como a análise bibliométrica das fontes selecionadas através do software VOSviewer. Foram identificadas 18 técnicas de conformação de filmes de cerâmicas porosas em 40 publicações. Foram identificadas 6 técnicas de manufatura aditiva para a fabricação dos eletrodos em 45 publicações. Os métodos e aplicações encontrados foram descritos. Após as análises destes dados, juntamente com a experiência dos membros do grupo de pesquisas na pesquisa e desenvolvimento dos elementos sensores monolíticos, principalmente no processamento das cerâmicas, as técnicas para a conformação do elemento sensor foram selecionadas. Tape casting e screen printing foram as técnicas que se mostrou mais interessantes para a fabricação de filmes cerâmicos porosos autossustentáveis. Considerando que o material metálico dos eletrodos do elemento sensor deverá apresentar baixa taxa de oxidação e a camada formada pelo eletrodo deve penetrar apenas nos poros superficiais grandes, foi selecionada a técnica direct ink writing para a fabricação dos eletrodos. ABSTRACT: This work aims to propose techniques for the conformation of capacitive ceramic sensor elements through systematic review and bibliometric analysis of the literature. Humidity sensors are of significant importance for several applications, especially for the application in environmental monitoring. The sensor element must be reliable, have mechanical and chemical resistance, and be replicable to be used safely in hostile environments and with difficult access for maintenance. The main objective of the research and development of capacitive porous sensors at INPE is to monitor the relative humidity of the air and soils installed in the INPE Data Collection Platforms (PCDs). Other uses of the sensor elements are for agriculture and monitoring of landslides. The sensor elements in the monolithic form (cylindrical inserts) are already developed, and the sensor system (with the electronic part included) is under development. The sensor elements of the film type, which allow the miniaturization of the system, are in the research step. Thus, the manufacturing methods of these sensor elements are of significant importance to achieve the elicited requirements. In this work, a systematic review was carried out using the ProKnow-C tool to identify the main methods for the manufacturing of components of a capacitive ceramic sensor element in the form of a porous film, as well as the bibliometric analysis of the selected sources using the VOSviewer software. The study identified eighteen porous ceramic film conformation techniques in 40 publications. The research identified six additive manufacturing techniques for the manufacture of the electrodes in 45 publications. The methods and applications found were described. After the analysis of these data, along with the experience of the members of the research group in the research and development of the monolithic sensor elements, mainly in the processing of ceramics, the techniques for the conformation of the sensor element were selected. Tape casting and screen printing are the techniques that proved to be most interesting for the manufacture of self-sustaining porous ceramic films. Considering that the metallic material of the electrodes of the sensor element must present a low oxidation rate and the layer formed by the electrode must penetrate only the large superficial pores, the direct ink writing technique was selected for the manufacture of the electrodes.</abstract>
		<area>FISMAT</area>
		<language>pt</language>
		<targetfile>publicacao.pdf</targetfile>
		<usergroup>anderson.barbosa@inpe.br</usergroup>
		<usergroup>simone</usergroup>
		<visibility>shown</visibility>
		<copyright>urlib.net/www/2012/11.12.15.10</copyright>
		<readpermission>allow from all</readpermission>
		<documentstage>not transferred</documentstage>
		<mirrorrepository>urlib.net/www/2017/11.22.19.04.03</mirrorrepository>
		<nexthigherunit>8JMKD3MGPCW/3F358GL</nexthigherunit>
		<nexthigherunit>8JMKD3MGPCW/46KTFK8</nexthigherunit>
		<nexthigherunit>8JMKD3MGPCW/46KUES5</nexthigherunit>
		<citingitemlist>sid.inpe.br/bibdigital/2013/10.14.21.39 1</citingitemlist>
		<hostcollection>urlib.net/www/2017/11.22.19.04</hostcollection>
		<agreement>autorizacao.pdf .htaccess .htaccess2</agreement>
		<lasthostcollection>urlib.net/www/2017/11.22.19.04</lasthostcollection>
		<supervisor>Nono, Maria do Carmo de Andrade,</supervisor>
		<url>http://mtc-m21c.sid.inpe.br/rep-/sid.inpe.br/mtc-m21c/2021/06.09.23.05</url>
	</metadata>
</metadatalist>